Installing Your New Faucet

TOOLS REQUIRED:
Plumbers' Putty or Caulking, Adjustable Wrench, Phillips Screwdriver, Channel Locks

Install faucet

Install faucet on sink.  (No sealant is required unless Mounting deck on sink is uneven)

Secure faucet and make water supply connections

Secure faucet with attachment nuts supplied. (hand tighten).
Connect water supply to faucet with 1/2" ips flexible supplies or 3/8" o.d. bull-nose risers.  Use adjustable wrench to tighten connections.  Do not over tighten.  Be careful not to kink copper supply when bending.  Use tubing cutter to cut to proper length.

Connect sprayer

Place spray holder into separate hole of sink and assemble nut onto shank.
From underside of sink and hand tighten nut.  Feed spray hose through spray holder and Attach coupling nut of hose to hose adaptor on valve body.  Tighten coupling nut firmly.
Make certain that spacer washer and rubber washer are attached to spray hose and thread spray head to nut.

Test installed faucet

Remove aerator.  With handles in off position, turn on water supplies and check all connections for leaks.  Operate both handles to flush water lines thoroughly.  Rotate spout in both directions.  Replace aerator.   Direct spray head into sink and activate spray.  Check hose connections for leaks.